Avatar Semi-Support Package

A separately sold option. It is a set of AO Shield Contact Prefabs, adjusted in advance for each avatar. On an unmodified avatar, placing it is all you need to do. If you have modified the face, it still works as a starting point for your own adjustment.

You need AO Shield Contact itself. The package cannot be used on its own.

Installing

1. Back up your project.
2. Import AO Shield Contact and the assets it needs into your project.
3. Import the Avatar Semi-Support Package, ASC_AvatarPack_<version>.
4. Put your avatar in the Hierarchy.
5. Place the Prefab from the folder named after your avatar, at the path below, into the avatar.

Assets/SangouStudio/AOShieldContact/[AvatarPack]

When you want to adjust it

Change the material on the contact object Contact to m_SetUpMaterial or m_SetUpMaterial_lilToon, found at the path below. Then adjust it following the installation video for the main product.

Assets/SangouStudio/AOShieldContact/Material

Notes on behaviour

On some avatars, a slight mesh intersection can appear while blinking.

A Prefab is included only where we judged this to be acceptable in practice. Where there is a small amount of protrusion, a note is included in a text file inside each folder. Please read it before use.

Only the blink blendshape has been checked for interference. Other blendshapes have not been checked.

Parts such as highlights may stick out of the contact, but this causes no practical problem.